DC Audio M2 Level 2 12 Inch Subwoofer
With more power handling than before, the Level 2 is back and better than ever!
This sub has everything you need in a daily driver except the cost. This is one of our greatest accomplishments.
It starts out with a double-stacked FEA optimized motor. A chrome top plate and T yoke to keep it looking good. It has 22 mm of X-Max, progressive spider, 2.5" voice coil, cast basket, push terminals and a rating suggestion of 600w RMS/1200w peak power handling.
This sub works great in sealed or ported enclosures and definitely gives you more bang for your buck! Made with high quality parts and hand built in the USA.
Sub Size |
10" |
12" |
|
Mounting Depth |
5.5" |
6" |
|
Mounting Hole Diameter |
9.35" |
11" |
|
Outside Driver Diameter |
11.0" |
12.5" |
|
Weight |
18lbs |
18.5lbs |
|
VC Diameter |
2.5" |
2.5" |
|
Displacement |
.12³ ft |
.14³ ft |
|
Magnet Weight |
15lbs |
15lbs |
|
Power Handling RMS/Peak |
600/1200 |
600/1200 |
|
Impedance (Ohm) |
D2 or D4 |
D2 or D4 |
|
Sd |
324cm² |
481cm² |
|
Vas |
13.89 liters |
30.6 liters |
|
Cms |
0.095 mm/N |
0.095 mm/N |
|
Mms |
210 g |
245 g |
|
Fs |
35.6 Hz |
33 Hz |
|
BL |
24 N/A |
24 N/A |
|
Re |
7.20 ohm |
7.20 ohm |
|
Le |
7 mH |
7 mH |
|
Qms |
8.96 |
8.46 |
|
Qes |
0.592 |
0.639 |
|
Qts |
0.555 |
0.594 |
|
Xmax |
22 mm |
22 mm |
|
Ref SPL @ 1 watt |
82.1 dB (82.6@2.83V) |
84.2 dB (84.7@2.83V) |
|
Suggested Sealed |
.5³ ft |
.75³ ft |
|
Suggested Ported |
1.0³ ft |
1.25³ ft |
|
DC Audio just knows how to make a great subwoofer. For around $200 you get a hand-built sub with amazing quality materials. If you want a loud sub get this one. DC Audio M2 Level 2 12-inch subwoofer made its comeback by becoming much better than ever. Its specification will make you believe that statement. It has a peak power of 1200 watts and RMS power of 600 watts and it takes it like a champ. It starts out with a double-stacked FEA optimized motor. A chrome top plate and T-yoke to keep it looking good. It has 22 mm of X-Max, progressive spider, 2.5" voice coil, cast basket, push terminals, and a rating suggestion of 600w RMS/1200w peak power handling. DC audio level 2 12 has an extremely rigid non-pressed paper cone assembly. It is surrounded by wide long-throw foam and has a rubber mounting gasket and is cast in an aluminum frame. It has a Polypropylene dust cover with the DC logo. The review of this subwoofer is just positive and the reason is this sub works great in sealed or ported enclosures and gives you more bang for your buck! Made with high-quality parts and hand-built in the USA.