DS18 200 ampere selectable charger and power supply. Good for Lead Acid, AGM, and Lithium batteries Made In Brazil
Shipping calculated at checkout.
- Product Overview
The newBC200L procharger is a high-performance power supply that can give a maximum current of 200 amps and operate in 3 different PHASES for the most efficient charging. The three modes available are Elevation, Absorption, and Equalization. The first phase (Elevation) is a pulsating constraint current which brings your battery up from low voltage safely. The next phase is (Absorption) which gives constant voltage as soon as a safe resting voltage is detected. The last phase is Equalization. This phase keeps the battery at safe resting voltage but sends pulses of 14.5v every 5 minutes to give the battery maximum charge while safely balancing the battery for longer battery life. Internal cooling fans and digital display help you breeze through the options.
There are 3 additional modes. The first is Charging State which is 3 phase charging. The next is AUTO ICS. This mode allows for quick charging and pulses the system between 13.8 to 14.4v in short bursts. This mode is not recommended for a dead battery. The last is POWER SUPPLY mode which acts like a full amperage power supply for a system that does not have or requite batteries.
|Input(Automatic Bi-volt):||90 to 140Vac to 240Vac|
|Consumption with maximum Load:||3000W|
|Maximum output current:||200 Amperes|
|Maximum Output Voltage:||14.4 Vdc|
|Intelligent Charging System:||13.8/ 14.4 Vdc cyclic|
|Accuracy Voltmeter / Amp Meter :||99% / 96%|
|Protections:||Excess charge, short on output and temperature|
|Dimesions L x W D (mm):||295 x 190 x 90 mm / 10.19 x 7.48 x 3.54 in|
|Weight kg 2.750 :||2.75|