JP95 - 1500w RMS 5 Channel amplifier

  • $399.99
    Unit price per 

Shipping calculated at checkout.

Apply For Financing

DESCRIPTION

JP 95 AMP: 1500w total RMS 5 Channel Amplifier

The JP95 might be the most practical 5 channel amplifier ever to hit the market. R&D in Las Vegas, NV & Dunnellon FL. The Heatsink carries over from the JP23. The red color takes from the OG days of Down4Sound and Car Audio, we call it Radiant Red.  

Inside the JP95 is a fan cooling the output side; now it has plexi black plate, and Bass Knob with voltage and temperature meter.

fan turns on at 120 degrees F

OUR STANDARD 1 YEAR MANUFACTURE DEFECTS ONLY | JUST LIKE ANY MANUFACTURE.

The warranty doesn't mean we cover it if you hook it up wrong or launch it out a potato launcher or someone dropped it or if your ex comes by and steals it. It also doesn't cover you feeding it the wrong voltage distorting it malfunction, or you submarining it in your vehicle. This Version IS NOT Marine Grade.

OUR Ratings: ( We rate on worst case scenario)

  • RMS power, 1ohm for CH5: 900W x 1
  • RMS power, 2ohm: 200W x 4 + 700W x 1
  • RMS power, 4ohm: 120W x 4 + 400W x 1
  • RMS power, 4ohm Bridged :400W x 2

INDEPENDENT 3RD PARTY TESTING RESULTS : Big D WIZ TESTED ON SMD AMPLIFIER DYNO

  • RMS power, 1ohm for CH5 BASS CH: 1212 W x 1 
  • RMS power, 4ohm: 120W x 4 Channels + Bass Ch: 482 Watts RMS x 1
  • RMS power, 2ohm: 200W x 4 Channels + Bass Ch: 816 Watts RMS x 1

JP95 Tuning Specs

CH1 & CH2
High Pass Filter: 20Hz - 5KHz

CH3 & CH4
High Pass Filter: 20Hz - 500Hz

Low Pass Filter: 50(500)Hz - 500(5K)Hz
Low pass Filter Multiply: x1, x10


CH5
Subsonic Filter: 10Hz - 50Hz
Low Pass Flter: 35Hz - 250Hz
Bass Boost: 0 - 9dB

Frequency Response: 10Hz - 30KHz for CH1 - CH4, 10Hz - 240Hz for CH5

 

Remote Bass Knob: Voltmeter & Temperature display remote control included


Input Sensitivity: 6V - 0.2V
Signal to Noise Ratio: 95dB <
T.H.D @ 4ohm: less than 0.1%
Fuse Rating: 160A
Length ( inches ): 17.71" 7.4" W x 2.24" H


    We Also Recommend