Product type: Midrange/Midbass Speakers

Vendor: PRV Audio



Add to the wishlist


PRV Audio’s Alto Series loudspeakers were carefully crafted to reproduce a natural, smooth sound, while remaining dynamic. The PRV Audio 10MR800A is the evolution of our mid range loudspeakers, our R&D department pushed the output limits on a mid range driver, creating this unique sound reproduction. This specially designed loudspeaker has a big brother the 12MR800A, which is also assembled with top of the line components for long lasting play, even during intense use.



  • 3″ Inside/Out aluminum voice coil wound on fiberglass former for hi-temp performance, 8 ohms
  • 800 watts continuous program power rating makes high acoustical output
  • Excellent performance in compact enclosures and horn boxes
  • 101 dB sensitivity, which makes it capable of generating a lot of output!
  • Detailed vocal reproduction on a wide frequency band response


To get superior fidelity, the special composite cone is built with non-pressed paper for reduced break-up, delivering a smooth frequency response and a low moving mass, increasing the efficiency of the speaker.


The 10MR800A is an extremely efficient 10″ midrange from PRV Audio. This driver is perfect for mating to compression drivers due to its wide frequency bandwidth and its high 101 dB sensitivity rating, on 3 way system (with a suggested 150 Hz, 12 dB/octave high pass filter in place)!

Its powerful optimized ferrite motor is vented to provide excellent cooling.


 The large 3″ voice coil allows for the high 400-watt power handling, and warrants the outstanding cooling system implemented into the motor.

High sensitivity rating of 101 dB 1W/1M which makes it capable of generating a lot of output!


Technical Details


Nominal Diameter 10″ (254 mm)
Nominal impedance 8 Ohms
Rated AES Power Handling (RMS) 400 Watts
Program Power 800 Watts
Sensitivity 2.83V at 1m 101 dB
Recommended Hi Pass Crossover**
**For Full Power Handling
150 Hz**
**12db Per Octave Crossover
Frequency Response at -10dB 100 – 6,700 Hz
Voice Coil Diameter 3″ (76 mm)
Voice Coil Wire CCAW
Voice Coil Winding Depth 15.0 mm
Former Material Glass Fiber
Magnetic Gap Depth 6.95 mm
Frame Material Die Cast Aluminum



Equivalent Volume Vas 16.20 l
Excursion (mathematical)*** Xmax 5.76 mm
Free Air Resonance Fs 93.26 Hz
Mechanical Factor Qms 10.14
Electrical Factor Qes 0.40
Total Factor Qts 0.38
Cone Area Sd 363 cm²
Mechanical Mass Mms 33.08 g
Bl Factor Bl 16.01 Tm
Dc Resistance Re 5.3 Ohms
Inductance Le 0.165 mH at 1 kHz
Mechanical Mass Without Air Mmd 29.16 g
Mechanical Compliance Cms 0.088 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4


Overall Diameter 10.31” (262 mm)
Front Mount Baffle Cutout 9.25” ( 235 mm)
Mounting Depth 4.51” (114.5 mm)
Overall Depth 5.02” (127.5 mm)
Net Weight 16.97 Lbs (7.7 kg)
Shipping Weight 18.01 Lbs (8.17 kg)
Carton Dimensions W x L x H 11.41” x 11.41” x 5.90”
(290 x 290 x 150 mm)