Great reasons to buy from us:
-
Quality Assurance
Quality Assurance -
Expert Guidance -
Customers Over Profits
Get ready to unleash deep, thunderous bass with the DS18 GEN-X112LD — a preloaded 12” ported subwoofer enclosure built to deliver serious low-end performance straight out of the box. Designed for both sound quality and output, the GEN-X112LD combines DS18’s powerhouse GEN-X124D 12” subwoofer with a precision-tuned ported enclosure that maximizes every watt of power and every note of your favorite tracks.
Engineered for Power and Clarity:
The GEN-X112LD pushes your bass to new depths with 450W RMS and 900W MAX of power handling, delivering consistent, distortion-free performance that hits hard every time. Its 2-ohm final impedance configuration ensures compatibility with a wide range of amplifiers, while its 91dB sensitivity and frequency range of 25Hz–250Hz ensure both punch and presence across the full low-frequency spectrum.
Precision-Tuned Enclosure Design:
Built with an internal volume of 1.6 ft³ (45.3L) and port-tuned to 35Hz, the GEN-X112LD is designed to produce tight, responsive bass with an extended low-end response that fills your vehicle with sound. Constructed from durable ½-inch MDF and wrapped in sleek black carpet, this enclosure is made to last while maintaining premium acoustic integrity.
The Heart of the System – The GEN-X124D Subwoofer:
The included GEN-X124D features a 2” black aluminum voice coil, 70 oz ferrite magnet, and a paper and fiberglass cone with foam surround for superior strength and control. Its dual 4-ohm coils wired in parallel bring the load to 2 ohms, optimizing amplifier output while maintaining crisp, accurate sound. With a -3dB drop-off at 29Hz, the GEN-X124D brings subsonic lows you can feel.
Built for Enthusiasts:
Designed for car audio lovers who want power, precision, and convenience in one package, the GEN-X112LD delivers a complete bass upgrade without the guesswork. Whether you’re adding to an existing system or starting fresh, this loaded enclosure brings a perfect balance of durability, output, and performance that defines DS18 quality.
Bring your system to life and Get LOUD with the DS18 GEN-X112LD.
Key Features:
-
Includes (1) GEN-X124D 12” Subwoofer Preloaded in a Ported Enclosure
-
RMS Power: 450W / MAX Power: 900W
-
Final Impedance: 2 Ohm (Dual 4-Ohm Coils Wired in Parallel)
-
Frequency Response: 25Hz–250Hz
-
Sensitivity: 91dB
-
Enclosure Tuned to 35Hz for Deep, Controlled Bass
-
Internal Volume: 1.6ft³ (45.3L)
-
Constructed from ½" MDF with Black Carpet Finish
-
70 Oz Ferrite Magnet and 2” Voice Coil for Reliable Power Handling
-
Front-Ported Design for Enhanced Output
-
-3dB Drop Point: 29Hz
-
Dimensions: 19.68” (W) x 13.78” (H) x 14” (D2)
-
Perfect for Cars, Trucks, and SUVs Seeking a Powerful, Efficient Bass Upgrade
| Shipping | Most items ship within 1–3 business days. Delivery time varies by item, vendor, and destination. |
Need help before ordering? Contact Droppin HZ and we can help confirm fitment, power needs, or supporting gear for your build.
Description
Get ready to unleash deep, thunderous bass with the DS18 GEN-X112LD — a preloaded 12” ported subwoofer enclosure built to deliver serious low-end performance straight out of the box. Designed for both sound quality and output, the GEN-X112LD combines DS18’s powerhouse GEN-X124D 12” subwoofer with a precision-tuned ported enclosure that maximizes every watt of power and every note of your favorite tracks.
Engineered for Power and Clarity:
The GEN-X112LD pushes your bass to new depths with 450W RMS and 900W MAX of power handling, delivering consistent, distortion-free performance that hits hard every time. Its 2-ohm final impedance configuration ensures compatibility with a wide range of amplifiers, while its 91dB sensitivity and frequency range of 25Hz–250Hz ensure both punch and presence across the full low-frequency spectrum.
Precision-Tuned Enclosure Design:
Built with an internal volume of 1.6 ft³ (45.3L) and port-tuned to 35Hz, the GEN-X112LD is designed to produce tight, responsive bass with an extended low-end response that fills your vehicle with sound. Constructed from durable ½-inch MDF and wrapped in sleek black carpet, this enclosure is made to last while maintaining premium acoustic integrity.
The Heart of the System – The GEN-X124D Subwoofer:
The included GEN-X124D features a 2” black aluminum voice coil, 70 oz ferrite magnet, and a paper and fiberglass cone with foam surround for superior strength and control. Its dual 4-ohm coils wired in parallel bring the load to 2 ohms, optimizing amplifier output while maintaining crisp, accurate sound. With a -3dB drop-off at 29Hz, the GEN-X124D brings subsonic lows you can feel.
Built for Enthusiasts:
Designed for car audio lovers who want power, precision, and convenience in one package, the GEN-X112LD delivers a complete bass upgrade without the guesswork. Whether you’re adding to an existing system or starting fresh, this loaded enclosure brings a perfect balance of durability, output, and performance that defines DS18 quality.
Bring your system to life and Get LOUD with the DS18 GEN-X112LD.
Key Features:
-
Includes (1) GEN-X124D 12” Subwoofer Preloaded in a Ported Enclosure
-
RMS Power: 450W / MAX Power: 900W
-
Final Impedance: 2 Ohm (Dual 4-Ohm Coils Wired in Parallel)
-
Frequency Response: 25Hz–250Hz
-
Sensitivity: 91dB
-
Enclosure Tuned to 35Hz for Deep, Controlled Bass
-
Internal Volume: 1.6ft³ (45.3L)
-
Constructed from ½" MDF with Black Carpet Finish
-
70 Oz Ferrite Magnet and 2” Voice Coil for Reliable Power Handling
-
Front-Ported Design for Enhanced Output
-
-3dB Drop Point: 29Hz
-
Dimensions: 19.68” (W) x 13.78” (H) x 14” (D2)
-
Perfect for Cars, Trucks, and SUVs Seeking a Powerful, Efficient Bass Upgrade
Shipping
| Shipping | Most items ship within 1–3 business days. Delivery time varies by item, vendor, and destination. |
Need help before ordering? Contact Droppin HZ and we can help confirm fitment, power needs, or supporting gear for your build.
REVIEW
Make sure this matches your bass setup.
Subwoofers perform best when the enclosure, amplifier, impedance, wiring, and electrical support all work together. Use these links to complete the system around this product.
