Great reasons to buy from us:
-
Quality Assurance
Quality Assurance -
Expert Guidance -
Customers Over Profits
Since their introduction in 2017 the Sundown LCS series woofers have been known for their impressive bass response and high levels of dependability. Typical entry level woofers are highly limited in terms of linear excursion, mechanical ruggedness, and thermal performance – these are all aspects that we have taken to the next level in the Sundown LCS series. The refreshed v.2 update was released in 2020 and added an all new, custom tooled frame, push terminals, a rubber mounting gasket, and upgraded tinsel leads.
A double stacked magnet structure and an extremely long voice coil allow us to achieve a class-leading linear x-max of 14mm one-way in addition to high mechanical clearances (over 2” peak-to-peak). The large coil combined with gap venting, chamfered pole-piece design, and optimized pole vent give the LCS Series impressive thermal performance. Mechanical stability and durability are addressed via the strong paper cone, rugged foam surround, and a high quality spider with fully tied-on tinsel leads. All major areas of woofer durability have been addressed to the maximum level possible in this category.
Bottom-line; if you are looking for a great subwoofer option and you have a tight budget the Sundown LCS Series woofers are for you. These woofers have absolutely no frills – simply raw performance for the dollar.
-
Features
- Xmax = 14mm one-way by 70% BL
- RMS Power = 300-watts
- Vented magnetic gap
- Vented Pole piece with chamfered edges for increased air powered voice coil cooling
- Custom tooled & vented, extra thick stamped steel frame
- Black Aluminum 2” voice coil former for superior heat dissipation
- High Temperature 4-Layer copper voice coil wire
- High Quality Push Terminals
- Stitched-On Flat Tinsel Leads to prevent fatigue and failure
- Optimized for small, ported enclosures
Specifications
-
T/S SPECS LCS V.2 10″D4 LCS V.2 12″D4 RE (Ohms) 7.140 6.9 FS (Hz) 34.642 33.442 VAS (L) 27.182 52.522 Qes 0.500 0.548 Qms 3.377 3.684 Qts 0.436 0.477 Le (mH) coming soon... 3.15 BL (NA) 19.313 20.073 Mms (Grams) 120.124 152.328 Cms (uM/N) 175.713 14.869 Sens (dB @ 1w/1m) 85.4 87.4
Enclosure Specifications
-
LCS v.2 10" LCS v.2 12" Sealed Enclosure 0.5-0.75 ft^3 1.0 ft^3 Ported Enclosure 1-1.25 ft^3 1.75 ft^3 Recommended Tuning 35 Hz 35Hz Recommended Port Area 20 in^2 26 sq in
-
| Shipping | Most items ship within 1–3 business days. Delivery time varies by item, vendor, and destination. |
Need help before ordering? Contact Droppin HZ and we can help confirm fitment, power needs, or supporting gear for your build.
Description
Since their introduction in 2017 the Sundown LCS series woofers have been known for their impressive bass response and high levels of dependability. Typical entry level woofers are highly limited in terms of linear excursion, mechanical ruggedness, and thermal performance – these are all aspects that we have taken to the next level in the Sundown LCS series. The refreshed v.2 update was released in 2020 and added an all new, custom tooled frame, push terminals, a rubber mounting gasket, and upgraded tinsel leads.
A double stacked magnet structure and an extremely long voice coil allow us to achieve a class-leading linear x-max of 14mm one-way in addition to high mechanical clearances (over 2” peak-to-peak). The large coil combined with gap venting, chamfered pole-piece design, and optimized pole vent give the LCS Series impressive thermal performance. Mechanical stability and durability are addressed via the strong paper cone, rugged foam surround, and a high quality spider with fully tied-on tinsel leads. All major areas of woofer durability have been addressed to the maximum level possible in this category.
Bottom-line; if you are looking for a great subwoofer option and you have a tight budget the Sundown LCS Series woofers are for you. These woofers have absolutely no frills – simply raw performance for the dollar.
-
Features
- Xmax = 14mm one-way by 70% BL
- RMS Power = 300-watts
- Vented magnetic gap
- Vented Pole piece with chamfered edges for increased air powered voice coil cooling
- Custom tooled & vented, extra thick stamped steel frame
- Black Aluminum 2” voice coil former for superior heat dissipation
- High Temperature 4-Layer copper voice coil wire
- High Quality Push Terminals
- Stitched-On Flat Tinsel Leads to prevent fatigue and failure
- Optimized for small, ported enclosures
Specifications
-
T/S SPECS LCS V.2 10″D4 LCS V.2 12″D4 RE (Ohms) 7.140 6.9 FS (Hz) 34.642 33.442 VAS (L) 27.182 52.522 Qes 0.500 0.548 Qms 3.377 3.684 Qts 0.436 0.477 Le (mH) coming soon... 3.15 BL (NA) 19.313 20.073 Mms (Grams) 120.124 152.328 Cms (uM/N) 175.713 14.869 Sens (dB @ 1w/1m) 85.4 87.4
Enclosure Specifications
-
LCS v.2 10" LCS v.2 12" Sealed Enclosure 0.5-0.75 ft^3 1.0 ft^3 Ported Enclosure 1-1.25 ft^3 1.75 ft^3 Recommended Tuning 35 Hz 35Hz Recommended Port Area 20 in^2 26 sq in
-
Shipping
| Shipping | Most items ship within 1–3 business days. Delivery time varies by item, vendor, and destination. |
Need help before ordering? Contact Droppin HZ and we can help confirm fitment, power needs, or supporting gear for your build.
REVIEW
Make sure this matches your bass setup.
Subwoofers perform best when the enclosure, amplifier, impedance, wiring, and electrical support all work together. Use these links to complete the system around this product.
