DC Audio M2 Level 2 12 Inch Subwoofer

  • $249.99
    Unit price per 
  • Save $60
Shipping calculated at checkout.

Apply For Financing

DESCRIPTION

DC Audio M2 Level 2 12 Inch Subwoofer

With more power handling than before, the Level 2 is back and better than ever!

This sub has everything you need in a daily driver except the cost. This is one of our greatest accomplishments.

It starts out with a double-stacked FEA optimized motor. A chrome top plate and T yoke to keep it looking good. It has 22 mm of X-Max, progressive spider, 2.5" voice coil, cast basket, push terminals and a rating suggestion of 600w RMS/1200w peak power handling.

This sub works great in sealed or ported enclosures and definitely gives you more bang for your buck! Made with high quality parts and hand built in the USA.

 

Sub Size 10" 12"
Mounting Depth 5.5" 6"
Mounting Hole Diameter 9.35" 11"
Outside Driver Diameter 11.0" 12.5"
Weight 18lbs 18.5lbs

 

VC Diameter 2.5" 2.5"
Displacement .12³ ft .14³ ft
Magnet Weight 15lbs 15lbs
Power Handling RMS/Peak 600/1200 600/1200
Impedance (Ohm) D2 or D4 D2 or D4
Sd 324cm² 481cm²
Vas 13.89 liters 30.6 liters
Cms 0.095 mm/N 0.095 mm/N
Mms 210 g 245 g
Fs 35.6 Hz 33 Hz
BL 24 N/A 24 N/A
Re 7.20 ohm 7.20 ohm
Le 7 mH 7 mH
Qms 8.96 8.46
Qes 0.592 0.639
Qts 0.555 0.594
Xmax 22 mm 22 mm
Ref SPL @ 1 watt 82.1 dB (82.6@2.83V) 84.2 dB (84.7@2.83V)
Suggested Sealed .5³ ft .75³ ft
Suggested Ported 1.0³ ft 1.25³ ft

DC Audio just knows how to make a great subwoofer. For around $200 you get a hand-built sub with amazing quality materials. If you want a loud sub get this one. DC Audio M2 Level 2 12-inch subwoofer made its comeback by becoming much better than ever. Its specification will make you believe that statement. It has a peak power of 1200 watts and RMS power of 600 watts and it takes it like a champ. It starts out with a double-stacked FEA optimized motor. A chrome top plate and T-yoke to keep it looking good. It has 22 mm of X-Max, progressive spider, 2.5" voice coil, cast basket, push terminals, and a rating suggestion of 600w RMS/1200w peak power handling. DC audio level 2 12 has an extremely rigid non-pressed paper cone assembly. It is surrounded by wide long-throw foam and has a rubber mounting gasket and is cast in an aluminum frame. It has a Polypropylene dust cover with the DC logo. The review of this subwoofer is just positive and the reason is this sub works great in sealed or ported enclosures and gives you more bang for your buck! Made with high-quality parts and hand-built in the USA.


We Also Recommend