DS18 ZR6.2D 6.5" Car Subwoofer with 600 Watts DVC- 2ohm

The ZR subline is a great entry level subwoofer that both handles great power and gives you smooth clean bass. These subs work great in both sealed and ported boxes giving you many options for placement in any vehicle.

This 6 inch model comes in both dual 2 and dual 4 ohm configurations giving you many options to match your amplifiers optimal impedance. This model comes with a 1.5 inch voice coil that handles 300w RMS and 600w max power. The large foam surround and pressed paper cone works greatly together to deliver smooth crisp bass that can be heard strongly throughout the vehicle.

Highlights

• Large foam surround giving great xmax and bass precision while keeping great cone control when the subwoofer is close to maximum power.
• Great power handling of 300w RMS and 600w max through a high strength 1.5 inch aluminum voice coil.
• Very strong stamped basket with show quality DS18 logos on the frame, magnet boot, magnet, and dustcap.
• Designed to give crisp and clear bass in any vehicle and can be used in sealed and ported boxes.
• Download ZR6.2D Product Manual 

  Nominal Diameter	6.5”
  Nominal Impedance	2+2 Ohms
  RMS Power Handling	300W
  MAX Power Handling	600W
  Sensitivity (1w/1m)	82 dB
  Frequency Response	38Hz - 200 Hz
  Recommended Lo Pass Crossover	160 Hz
  MOTOR
  Voice Coil Diameter	1.5” / 38.8mm
  VC Former Material	Aluminum
  Winding Material	Copper
  Cone Material	Non Pressed Paper
  Dust Cap Material	PPI
  Surround Material	Foam
  Basket Material	Steel
  Basket Color/Finish	Matte Black
  Magnet Material	Ferrite
  Magnet Weight	50 oz
  Displacement Volume	0.02 ft3
  THIELE & SMALL PARAMETERS
  Equivalent Volume	2.65 L
  Excursion (one way)	15mm
  Free Air Resonance	65Hz
  Mechanical Factor	3.412
  Electrical Factor	0.769
  Total Factor	0.627
  Moving Mass	55.41g
  Compliance	91.07µ m/N
  BL Factor	5.37
  Voice Coil Inductance	324.3m mH
  Cone Area	143 Cm2
  DC Resistance	1.8 + 1.8 ohm
  Efficiency Bandwidth Product	84.5
  MEASUREMENTS
  Overall Diameter	6.75” / 171.6mm
  Overall Depth	4.23” / 107.4mm
  Front Mount Baffle Cutout	5.54” / 140.8mm
  Mounting Depth	3.49” / 88.8mm
  Motor Diameter	5.23" / 133mm