Great reasons to buy from us:
-
Quality Assurance
Quality Assurance -
Expert Guidance -
Customers Over Profits
DS18’s HYDRO Series is back and better with upgraded products to fulfill all your Marine Grade Audio equipment needs.
The CF-X8PRO is DS18’s revamped compact wakeboard tower speaker designed to blast and outlast. These models have a new and redesigned clamping system that is much stronger overall than the previous model and their compact size make these pods applicable in almost any sound system.
This upgraded model of the CF-X8 comes equipped with a Pro Audio Water Resistant Hybrid Mid-Range & Compression Driver Loudspeaker, the PRO-HY8.4B, for an expansive range of frequencies that get as high as 20KHz and as low as 80Hz. The neodymium magnets installed in the PRO-HY8.4B’s compression driver helps establish a stronger motor/cone assembly guaranteeing these speakers will withstand the worst of the elements.
The CF-X8PRO has a larger voice coil with higher potential for loudness over the standard CF complete pods which also adds great sound reproduction, and extended longevity. The power handling ratings on these pods are 250 W RMS and 500 W MAX, which is double the standard NXL pod rating.
These tower speakers also have carbon fiber style plastic and integrated RGB LED Lighting to complement the vibe of any system. The LED BTC (LED Bluetooth Controller) is sold separately and required to control the lights on this speaker.
If you’re looking to take your system to new heights, the CF-X8PRO is guaranteed to turn it up a notch.
Highlights
- DS18 HYDRO Series 8" Tower Speaker with Built-in Hybrid Mid-Range & Compression Driver to blast the competition's audio away.
- Enhanced Durability and Power Handling For A Tower Speaker With Unmatched Longevity
- Pair NBR Pad For 1” to 2” Tube to Help Get The Best Fitment For Your Tower Size
- Clamps for 1” to 2” Roll Cage or Tube
- Two CS-8 Silicone Marine Speaker Covers Included For Added Protection
- Front Logo and Back Covers Can Be Rotated For Correct Angle Display
- RGB LED system designed throughout the pod so you see lighting on the speaker ring, and pod housing
Great For
- Marine Audio
- ATV Audio
- UTV Audio
- Jeep Audio
- Off-Road Audio
- DIY Projects
| GENERAL SPECIFICATIONS | |
| Nominal Diameter | 8" / 203mm |
| Nominal Impedance | 4 Ohms |
| RMS Power Handling | 250W |
| MAX Power Handling | 500W |
| Sensitivity (1w/1m) | 97dB |
| Frequency Response | 80Hz - 20KHz |
| Recommended HI Pass Crossover | 100Hz |
| BODY / FEATURES | |
| Enclosure Material | Injection PC+ABS |
| Marine Grade Type | IP65+UV Stable |
| RGB LED | Integrated LED-RGB Acrylic Ring Lighting 6 Core Wires for Lighting and Speaker |
| Grill Type | ASA (Injection Grill) |
| Clamps | Die-Cast Adjustable (1"~2") 360 Degree Rotation Mounting Buried Wire or Open Wire Mounting Optional |
| Front Logo | Yes, can be rotated for correct angle display |
| Rear Logo | Yes, can be rotated for correct angle display |
| Finish | Carbon Fiber |
| Sold in Pair | Yes |
| WOOFER SPECIFICATIONS | |
| Voice Coil Diameter | 1.5" / 38.6mm |
| Voice Coil Former Material | Glass Fiber |
| Winding Material | CCAW |
| Cone Material | Water Resistant Paper |
| Surround Material | Coated Cloth |
| Basket Material | Aluminum |
| Magnet Material | Ferrite |
| Magnet Weight | 27 Oz |
| DRIVER SPECIFICATIONS | |
| Nominal Diameter | 1" / 25.4mm |
| Voice Coil Diameter | Compression driver with Injection molding ABS horn |
| Voice Coil Former Material | Titanium |
| Winding Material | Neodymium |
| Diaphragm Material | 6dB/Oct |
| Magnet Material | 3.26" / 83mm |
| Magnet Weight | |
| MEASUREMENT | |
| Overall Diameter | 8.6" / 218mm |
| Overall Depth | 9.4" / 238mm |
| Overall Height | 12.3" / 313mm |
| COLOR | Carbon Fiber |
| Shipping | This item ships to |
| Delivery | Estimated between and . Will usually ship within 1-3 businesses day. |
Description
DS18’s HYDRO Series is back and better with upgraded products to fulfill all your Marine Grade Audio equipment needs.
The CF-X8PRO is DS18’s revamped compact wakeboard tower speaker designed to blast and outlast. These models have a new and redesigned clamping system that is much stronger overall than the previous model and their compact size make these pods applicable in almost any sound system.
This upgraded model of the CF-X8 comes equipped with a Pro Audio Water Resistant Hybrid Mid-Range & Compression Driver Loudspeaker, the PRO-HY8.4B, for an expansive range of frequencies that get as high as 20KHz and as low as 80Hz. The neodymium magnets installed in the PRO-HY8.4B’s compression driver helps establish a stronger motor/cone assembly guaranteeing these speakers will withstand the worst of the elements.
The CF-X8PRO has a larger voice coil with higher potential for loudness over the standard CF complete pods which also adds great sound reproduction, and extended longevity. The power handling ratings on these pods are 250 W RMS and 500 W MAX, which is double the standard NXL pod rating.
These tower speakers also have carbon fiber style plastic and integrated RGB LED Lighting to complement the vibe of any system. The LED BTC (LED Bluetooth Controller) is sold separately and required to control the lights on this speaker.
If you’re looking to take your system to new heights, the CF-X8PRO is guaranteed to turn it up a notch.
Highlights
- DS18 HYDRO Series 8" Tower Speaker with Built-in Hybrid Mid-Range & Compression Driver to blast the competition's audio away.
- Enhanced Durability and Power Handling For A Tower Speaker With Unmatched Longevity
- Pair NBR Pad For 1” to 2” Tube to Help Get The Best Fitment For Your Tower Size
- Clamps for 1” to 2” Roll Cage or Tube
- Two CS-8 Silicone Marine Speaker Covers Included For Added Protection
- Front Logo and Back Covers Can Be Rotated For Correct Angle Display
- RGB LED system designed throughout the pod so you see lighting on the speaker ring, and pod housing
Great For
- Marine Audio
- ATV Audio
- UTV Audio
- Jeep Audio
- Off-Road Audio
- DIY Projects
| GENERAL SPECIFICATIONS | |
| Nominal Diameter | 8" / 203mm |
| Nominal Impedance | 4 Ohms |
| RMS Power Handling | 250W |
| MAX Power Handling | 500W |
| Sensitivity (1w/1m) | 97dB |
| Frequency Response | 80Hz - 20KHz |
| Recommended HI Pass Crossover | 100Hz |
| BODY / FEATURES | |
| Enclosure Material | Injection PC+ABS |
| Marine Grade Type | IP65+UV Stable |
| RGB LED | Integrated LED-RGB Acrylic Ring Lighting 6 Core Wires for Lighting and Speaker |
| Grill Type | ASA (Injection Grill) |
| Clamps | Die-Cast Adjustable (1"~2") 360 Degree Rotation Mounting Buried Wire or Open Wire Mounting Optional |
| Front Logo | Yes, can be rotated for correct angle display |
| Rear Logo | Yes, can be rotated for correct angle display |
| Finish | Carbon Fiber |
| Sold in Pair | Yes |
| WOOFER SPECIFICATIONS | |
| Voice Coil Diameter | 1.5" / 38.6mm |
| Voice Coil Former Material | Glass Fiber |
| Winding Material | CCAW |
| Cone Material | Water Resistant Paper |
| Surround Material | Coated Cloth |
| Basket Material | Aluminum |
| Magnet Material | Ferrite |
| Magnet Weight | 27 Oz |
| DRIVER SPECIFICATIONS | |
| Nominal Diameter | 1" / 25.4mm |
| Voice Coil Diameter | Compression driver with Injection molding ABS horn |
| Voice Coil Former Material | Titanium |
| Winding Material | Neodymium |
| Diaphragm Material | 6dB/Oct |
| Magnet Material | 3.26" / 83mm |
| Magnet Weight | |
| MEASUREMENT | |
| Overall Diameter | 8.6" / 218mm |
| Overall Depth | 9.4" / 238mm |
| Overall Height | 12.3" / 313mm |
| COLOR | Carbon Fiber |
Shipping
| Shipping | This item ships to |
| Delivery | Estimated between and . Will usually ship within 1-3 businesses day. |
