Great reasons to buy from us:
-
Quality Assurance
Quality Assurance -
Expert Guidance -
Customers Over Profits
Specifically Designed for light suspension low watt subwoofers
PRE LOADED AND WIRED to 2 ohm with 1 SUNDOWN AUDIO LCSv2 12" Subwoofer.
1.75 Cu Ft Per Side 3.5 Total
37 Hz tune
FORWARD FIRING
Grooved Edge Charcoal Carpet
(1) Sound Mekanix BASE Terminal Cup with 3 ft. of 12 ga. wire ($9.99 Retail)
Sound Mekanix BASE Enclosure...
What is BASE??? Basic Affordable Sub Enclosure!!!
These are where we start off in our enclosure line. These are our basic enclosure for entry level subs, but with the same building methods and QUALITY as our HIGH-END ENCLOSURES
-Partial DADO construction
-Fully Rounded Outside / Port
-DADO Window Bracing
We STRONGLY recommend using ENTRY LEVEL subwoofers in these enclosures with stamped steel baskets and motors less than 20 lbs., please use our heavier duty MDF / BALTIC BIRCH enclosures if you are using cast baskets and large power handling subwoofers!!!!
EVERYONE ELSE in this price category uses Butt joints which means less glue area = less strength!!! DADO joints are exponentially stronger!!!
These Enclosures are universally designed for low watt light suspension subwoofers and are very universal in specs to many brands on the market. These are the same spec boxes found in many shops across the USA.
These boxes are made from 3/4″ Industrial Treated Particle Board.
Box Dimensions
– 32 x 20 x 14
Approximate Weight – 45 LBS
Approximate Shipping Weight – 55 LBS
– Hole Cutout =11.125”
– 3/4 Particle Board Dado construction
– 3.5 Cubes
– 37 Hz Tuning
– 43.75 SQ in Port
| Shipping | This item ships to |
| Delivery | Estimated between and . Will usually ship within 1-3 businesses day. |
Description
Specifically Designed for light suspension low watt subwoofers
PRE LOADED AND WIRED to 2 ohm with 1 SUNDOWN AUDIO LCSv2 12" Subwoofer.
1.75 Cu Ft Per Side 3.5 Total
37 Hz tune
FORWARD FIRING
Grooved Edge Charcoal Carpet
(1) Sound Mekanix BASE Terminal Cup with 3 ft. of 12 ga. wire ($9.99 Retail)
Sound Mekanix BASE Enclosure...
What is BASE??? Basic Affordable Sub Enclosure!!!
These are where we start off in our enclosure line. These are our basic enclosure for entry level subs, but with the same building methods and QUALITY as our HIGH-END ENCLOSURES
-Partial DADO construction
-Fully Rounded Outside / Port
-DADO Window Bracing
We STRONGLY recommend using ENTRY LEVEL subwoofers in these enclosures with stamped steel baskets and motors less than 20 lbs., please use our heavier duty MDF / BALTIC BIRCH enclosures if you are using cast baskets and large power handling subwoofers!!!!
EVERYONE ELSE in this price category uses Butt joints which means less glue area = less strength!!! DADO joints are exponentially stronger!!!
These Enclosures are universally designed for low watt light suspension subwoofers and are very universal in specs to many brands on the market. These are the same spec boxes found in many shops across the USA.
These boxes are made from 3/4″ Industrial Treated Particle Board.
Box Dimensions
– 32 x 20 x 14
Approximate Weight – 45 LBS
Approximate Shipping Weight – 55 LBS
– Hole Cutout =11.125”
– 3/4 Particle Board Dado construction
– 3.5 Cubes
– 37 Hz Tuning
– 43.75 SQ in Port
Shipping
| Shipping | This item ships to |
| Delivery | Estimated between and . Will usually ship within 1-3 businesses day. |
REVIEW
Related Products
